I talked to Jim Westbrook today, a recent airhead expert find through craigslist about my flasher relay issue, which to date still has not been resolved. I bought a new flasher from Napa after taking the advice from the airhead archive, but no luck.
| Flasher Relay |
Front | | | Part: | ATM 111953227D | | Product Line: | Altrom | |
| |
When I starting troubleshooting, Jim asked if I had brake lights and horn, and sure enough I did not. The problem after all this troubleshooting turned out to be a bad fuse connection on the top fuse on the connection board. I sanded the contact, and replaced the fuse with a more sturdy looking one, and sure enough I got brake lights, horn and flasher back using my original OEM flasher, go figure, and the new flasher does not work, 10 bucks down the drain.
No so fast grasshopper, the issue noted in my previous post about the indicator light is still not working. With the indicator light hooked in (black.white wire on Terminal C of the flasher), the flasher starts buzzing, and I get no light. I will take a look at the circuit board, and light, because my high beam indicator light is also not working, and they are tied together at the ground side.
Good link on flasher relay substitute wiring.,
LINK
No comments:
Post a Comment