Progress

At this point I wanted to re-assemble the bike to working order in order to get the Texas State Inspection completed, so I can register and tag the bike for riding.

I had removed the rear fender, taillight assembly to get to the battery tray easier.

• I started to clean the swing arm on the left side
• Misc sections of the frame were sanded
• Cleaned out the oil in the points area
• Started 10K fluid changes
• Put Points cover, start cover, and air box back together
• Put Rear fender and tail light back on
• Battery re-connected with battery tender plug back on
• Greased Swing arm

To Do

• Change Oil/Oil pan gasket
• Finish 10K service, Valves, Timing, Cable Lube, Sync Carbs
• Centerstand needs to be restored